Muscle Spasm ICD-10 Codes: M62.830, M62.831, and M62.838 Billing Guide for Chiropractors

Chiropractor documenting exam findings on a patient chart
Editorial Transparency
Created by: Billing Service Quotes Editorial Team (Chiropractorbillers.com is powered by Billing Service Quotes).
Technical Review: Tim Daniels, Director of Strategic Accounts, Billing Service Quotes.
Billing Service Quotes is a matching platform for providers searching for vetted medical billing companies. Finding a match is 100% for providers.

What is the ICD-10 code for muscle spasm?

The muscle spasm ICD-10 code is a three-way choice under subcategory M62.83, a non-billable header that splits into M62.830 for muscle spasm of the back, M62.831 for muscle spasm of the calf, and M62.838 for other muscle spasm, including the neck and shoulders. None of the three codes changed in the FY2027 ICD-10-CM update that took effect October 1, 2026.

  • Neck spasm: ICD-10-CM has no neck-specific spasm code, so cervical and upper trapezius spasm is reported with M62.838.
  • Medicare chiropractic claims: A spasm code is never the primary diagnosis; the M99.0- subluxation goes first and the spasm code supports it as the secondary condition.
  • Cramp versus spasm: Category M62 carries an Excludes1 note for R25.2 (cramp and spasm), so report the M62.83- code or R25.2, never both on the same claim.

Billing dates of service on or after October 1, 2026? Start with our breakdown of the chiropractic ICD-10 code changes for FY2027 before you update your fee tickets.

Muscle Spasm ICD-10 Codes by Body Region in 2026

Muscle spasm sits in Chapter 13 of ICD-10-CM, Diseases of the Musculoskeletal System and Connective Tissue, under category M62, Other disorders of muscle. Subcategory M62.83 is a header, not a reportable code, so a claim that stops at five characters rejects at the clearinghouse before a payer ever reviews it. The billable choice comes down to where the spasm sits and the exact word the provider used to describe it.

CodeDescriptionBillableTypical chiropractic use
M62.83Muscle spasm (header)NoNever report; select a sixth character
M62.830Muscle spasm of backYesThoracic and lumbar paraspinal spasm
M62.831Muscle spasm of calfYesGastrocnemius or soleus spasm, Charley-horse
M62.838Other muscle spasmYesCervical, trapezius, gluteal, piriformis, thigh spasm
R25.2Cramp and spasmYesSymptom code when documentation says cramp
G47.62Sleep related leg crampsYesNocturnal leg cramps reported by the patient

The official FY2027 ICD-10-CM Alphabetic Index explains why wording matters. The index entry for Spasm, muscle NEC points to M62.838, with a subterm for back that points to M62.830. The entry for Cramp, muscle points to R25.2, and Cramp, leg, sleep related points to G47.62. A note that reads “lumbar paraspinal spasm” lands on M62.830, while a note that reads “low back cramping” indexes to a symptom code that many commercial payers treat as nonspecific.

The calf code is the one exception that is not driven by the index. M62.831 carries the inclusion term Charley-horse in the Tabular List, which is why a patient complaint of a Charley-horse belongs on M62.831 rather than R25.2. The most common issue we see chiropractors run into is a template that defaults every spasm finding to M62.838, even when the exam clearly documents lumbar paraspinal involvement that should be coded to M62.830.

What is the ICD-10 code for neck muscle spasm?

The ICD-10 code for neck muscle spasm is M62.838, Other muscle spasm. ICD-10-CM does not include a cervical or neck-specific spasm code, so cervical paraspinal, upper trapezius, levator scapulae, and scalene spasm are all reported with M62.838. Pair it with a separate pain or strain code only when the record documents that condition independently.

Neck spasm is where chiropractic claims most often collect diagnosis conflicts. Practices commonly list M62.838 alongside M54.2, cervicalgia, and that pairing is allowed because neither category carries an Excludes1 note against the other. The question payers ask is whether both codes describe something distinct. If the note documents palpable hypertonicity of the cervical paraspinals plus pain with a separate location, quality, and intensity rating, both codes stand on their own.

The picture changes when the neck spasm follows an injury. When the provider diagnoses an acute strain, such as S16.1XXA, strain of muscle, fascia and tendon at neck level, initial encounter, the ICD-10-CM Official Guidelines for Coding and Reporting FY2027, Section I.B.5, instruct coders not to report signs and symptoms that are routinely associated with the definitive diagnosis. Protective guarding spasm is a routine part of an acute strain, so adding M62.838 on the first visit invites a request for records unless the provider explains why the spasm is a separate finding.

Thoracic spasm is a different call. Because the index subterm reads simply back, not low back, mid-back and rhomboid-region paraspinal spasm goes to M62.830, not M62.838. One question we hear constantly from practice managers is why the same patient carries two different spasm codes on one claim. The answer is usually correct coding: M62.838 for the cervical region and M62.830 for the thoracic region when both are documented and treated.

Can you bill M62.830 with R25.2 or myalgia?

No. Category M62 carries an Excludes1 note for cramp and spasm (R25.2) and for myalgia (M79.1-), so neither code may be reported with M62.830, M62.831, or M62.838 for the same condition. Choose the M62.83- code when the provider documents spasm, and choose R25.2 or an M79.1- code only when that is the documented finding.

An Excludes1 note is the strictest instruction in ICD-10-CM. It means the two conditions cannot occur together as described, so payer edits treat the combination as a coding error. The FY2027 Tabular List places these Excludes1 notes at the category level for M62, which means they apply to every code underneath it, including all three spasm codes. The category also excludes stiff-man syndrome (G25.82), alcoholic myopathy (G72.1), and drug-induced myopathy (G72.0).

The reverse direction works differently. R25.2 carries Excludes2 notes for muscle spasm of back (M62.830) and muscle spasm of calf (M62.831). An Excludes2 note means the condition is not part of R25.2, not that both can never appear together. In practice, the Excludes1 at M62 controls, and claim scrubbers flag the pair either way.

Myalgia is the conflict chiropractors hit most often. Since the FY2023 expansion, myalgia requires a fifth character: M79.10 for unspecified site, M79.11 for mastication muscle, M79.12 for auxiliary muscles of the head and neck, and M79.18 for other site. A fee ticket that lists M62.838 with M79.12 for the same neck region triggers the Excludes1 edit. Section I.A.12.a of the Official Guidelines allows an exception only when the two conditions are unrelated, such as myalgia of the jaw and spasm of the lumbar paraspinals, and the note must make that separation obvious.

Sequencing Spasm Codes on Medicare Chiropractic Claims

Medicare pays chiropractors only for manual manipulation of the spine to correct a subluxation, under the Medicare Benefit Policy Manual, Chapter 15, Section 30.5. That rule decides where a spasm code can sit. For CPT 98940, 98941, and 98942, the primary diagnosis must be the precise level of subluxation, coded M99.01 for cervical, M99.02 for thoracic, M99.03 for lumbar, M99.04 for sacral, or M99.05 for pelvic. The neuromusculoskeletal condition that necessitates treatment, which can include M62.830 or M62.838, follows as the secondary diagnosis.

Palmetto GBA’s Billing and Coding Article A56616, revision effective December 19, 2024, shows how narrow the primary list is. Its Group 1 codes supporting medical necessity are only M99.01 through M99.05, and it states that a claim noting only pain is insufficient. Some Medicare Administrative Contractors publish secondary diagnosis lists, while others have removed them, so confirm what your MAC accepts before you build a template.

Spasm also does quiet work in the exam. Section 240.1.2 of the same chapter lets a chiropractor demonstrate subluxation through the PART exam: Pain or tenderness, Asymmetry or misalignment, Range of motion abnormality, and Tissue or tone changes. Two of the four criteria are required, and one must be asymmetry or range of motion. Palpable paraspinal spasm documents the T criterion, but it never qualifies a region on its own.

Here is what that costs when it goes wrong. Take an illustrative practice billing 300 Medicare CMT visits a month at an assumed allowed amount of $40 per visit, or $12,000 a month. If 10% of those claims deny because a spasm code was listed first or the region lacked an A or R finding, the practice loses $1,200 a month, or $14,400 a year, before rework time. Providers often come to us after an audit letter, when the denials have already stacked up. With CMS changes covered in our review of 2027 chiropractic Medicare payment changes, that margin matters more next year.

Spasm sequencing errors on Medicare claims are fixable. Compare chiropractic billing companies in our network, with rates starting as low as 2.95%, and get connected within 30 minutes.

How do you document muscle spasm to prevent denials?

Document muscle spasm by naming the exact muscle and region, describing palpation findings, grading severity, linking the spasm to the treatment plan, and recording change at each visit. Use the word spasm rather than cramp or tightness when spasm is the finding, because the ICD-10-CM index routes those words to different codes.

  • Name the muscle group and spinal region, such as left L3 to L5 paraspinals, so the coder can choose M62.830 or M62.838 without guessing.
  • Describe the palpation finding, including hypertonicity, guarding, or trigger points, with laterality noted.
  • Grade the severity on a consistent scale so payers can see measurable change between visits.
  • Link the spasm to the subluxation level and the PART findings that support each region treated.
  • Tie the spasm to each therapy billed, since commercial payers expect the diagnosis to support manual therapy or massage.
  • Record improvement or lack of improvement at every re-exam to separate active care from maintenance.

The fifth step is where commercial claims succeed or fail. Medicare does not pay chiropractors for therapies such as CPT 97140, manual therapy, or 97124, massage, but many commercial plans do, and a spasm diagnosis is one of the most common justifications for them. Check our guide to chiropractic CPT codes to confirm which services your payer mix supports and how each payer counts timed units.

The sixth step protects you from the maintenance trap. Under Section 240.1.3 of the Medicare Benefit Policy Manual, care that stops producing objective improvement becomes maintenance therapy, and the AT modifier no longer belongs on the claim. A spasm graded the same at five consecutive visits is the kind of pattern that draws an additional documentation request. Across the billing companies in our network, a recurring pattern is that chiropractic-focused teams catch these flat-line notes before submission, while generalist billers find out after the denial arrives.

Frequently Asked Questions

Is M62.83 a billable ICD-10 code?

No. M62.83 is a non-billable header for muscle spasm. Every claim must carry a sixth character: M62.830 for the back, M62.831 for the calf, or M62.838 for any other site. Submitting M62.83 alone causes a clearinghouse rejection for an invalid diagnosis code before the payer reviews the claim.

What is the ICD-10 code for leg muscle spasm?

Calf spasm, including a Charley-horse, is M62.831. Thigh, hamstring, or quadriceps spasm goes to M62.838 because no thigh-specific code exists. If the patient describes leg cramps that occur during sleep, the index points to G47.62, sleep related leg cramps, rather than a spasm code.

Can muscle spasm be the primary diagnosis on a chiropractic claim?

On Medicare claims for CPT 98940 through 98942, no. The primary diagnosis must be the subluxation level, M99.01 through M99.05, with the spasm listed as the secondary condition. Some commercial payers accept a spasm code first for therapy services, so confirm the order in each payer’s chiropractic policy.

Did the muscle spasm ICD-10 codes change on October 1, 2026?

No. The FY2027 ICD-10-CM code set, effective October 1, 2026 through September 30, 2027, made no changes to M62.830, M62.831, M62.838, or R25.2. The Excludes1 notes at category M62 also remain in place, so existing templates stay valid if they already follow those rules.

What is the difference between M62.838 and R25.2?

M62.838 reports a documented spasm of a specific skeletal muscle outside the back and calf. R25.2 is a symptom code from Chapter 18 for cramp and spasm when no more specific condition is documented. Category M62 excludes R25.2, so the two codes cannot be reported together for the same finding.

Should I code muscle spasm separately from a lumbar strain?

Usually not on the initial visit. Under Official Guidelines Section I.B.5, signs routinely associated with a definitive diagnosis are not coded separately, and guarding spasm is typical of an acute strain such as S39.012A. Add M62.830 only when the record shows spasm as a distinct, separately treated finding.

Next Steps

Muscle spasm coding looks simple until a claim comes back. Start by auditing your EHR fee tickets for any template that still offers M62.83 without a sixth character, then search your last 90 days of claims for spasm codes billed alongside R25.2 or an M79.1- myalgia code. Those two checks catch most preventable rejections, and both take less than an hour with a standard claims report from your practice management system.

Next, confirm your Medicare sequencing. Every CMT claim should lead with the M99.0- subluxation, carry PART findings for each region, and use the spasm code only as the supporting condition. Our recap of FY2027 chiropractic ICD-10 code changes lists the other diagnosis updates that took effect October 1, 2026, and our 2027 chiropractic Medicare payment changes breakdown shows what next year’s fee schedule means for your CMT revenue.

Finally, match each spasm diagnosis to the services it supports. Review the chiropractic CPT codes your commercial payers reimburse, and make sure every therapy line points back to a documented finding. If your team does not have time for this level of review every week, a billing partner that specializes in chiropractic claims can take it on and report denial trends back to you every month.

Get matched with a chiropractic billing company that knows Medicare sequencing. Rates start as low as 2.95%, and the match is free.

Get Matched In 30 Minutes

Get a FREE Quote

Tell us about your practice and we'll connect you with trusted billing companies.

100% Free to providers — No hidden fees at any stage

Where should we send your quote(s)?

We'll send it directly to your inbox

How many providers does your practice have?

We'll find a billing company that can support your needs

Where is your practice located?

We'll find a billing company that serves providers in your area

loading
Tim Daniels
Online now
Tim Daniels

How can I help?

Send me your number and I'll personally call you in less than 24 hours to discuss any questions you may have about our chiropractic billing partners

Mon–Fri, 9:00am–5:30pm Or email instead →
Got it — talk soon.
I'll call you within one business hour. Check your phone for an unknown number.