What is the ICD-10 code for lumbar sprain?
The ICD-10 code for lumbar sprain is S33.5XXA, a billable ICD-10-CM diagnosis code that reports a sprain of the ligaments of the lumbar spine while the patient is receiving active treatment. The parent code S33.5 cannot be billed by itself and needs a 7th character: A for active treatment, D for routine healing-phase care, or S for sequela. The code carries over unchanged into the FY2027 code set effective October 1, 2026.
- Sprain or strain: S33.5XXA reports a ligament injury, while a muscle or tendon injury of the lower back is coded S39.012A, and both can be billed when both are documented.
- Lumbosacral and SI sprains: The ICD-10-CM Index sends lumbosacral sprain to S33.9XXA and sacroiliac joint sprain to S33.6XXA.
- Medicare claims: Medicare pays chiropractic manipulation only when a subluxation code such as M99.03 is listed first, so S33.5XXA belongs in a secondary position.
New to chiropractic diagnosis coding? Start here: Chiropractic ICD-10 Codes: 2026 Cheat Sheet.
The S33 Lumbar Sprain Code Family
In our experience matching chiropractors with billing partners, lumbar sprain denials rarely come from choosing the wrong condition. They come from choosing the wrong member of the code family, or from sending the code without its 7th character. Category S33 in Chapter 19 of ICD-10-CM covers dislocation and sprain of the joints and ligaments of the lumbar spine and pelvis, and four of its subcategories handle sprains.
| Code | Description | Use when the record shows | Characters |
|---|---|---|---|
| S33.5XXA | Sprain of ligaments of lumbar spine, initial encounter | Ligament injury at L1 to L5 with a documented traumatic mechanism | 7 |
| S33.6XXA | Sprain of sacroiliac joint, initial encounter | Ligament injury at the SI joint | 7 |
| S33.8XXA | Sprain of other parts of lumbar spine and pelvis, initial encounter | A specified lumbar or pelvic site not covered by S33.5 or S33.6 | 7 |
| S33.9XXA | Sprain of unspecified parts of lumbar spine and pelvis, initial encounter | Lumbosacral sprain, or a lumbar and pelvic sprain with no site specified | 7 |
| S39.012A | Strain of muscle, fascia and tendon of lower back, initial encounter | Muscle or tendon injury rather than ligament injury | 7 |
Every code in category S33 requires a 7th character. Because S33.5 has only four characters before the extension, the placeholder X fills positions five and six, which is why the billable code reads S33.5XXA rather than S33.5A. A claim that carries S33.5 or S33.5XX alone fails the clearinghouse edit as an incomplete code.
Two tabular notes matter on every claim. The category carries an Excludes2 note for strains of the muscles and tendons of the lower back (S39.01-), which means a sprain and a strain can appear on the same claim when the record supports both. It also tells coders to code any associated open wound. The S33 sprain codes did not change in the FY2027 update; the October 2026 sprain revision landed on the sternoclavicular codes instead, as covered in our breakdown of chiropractic ICD-10 code changes for October 2026.
Is a lumbar sprain the same as a lumbar strain?
No. A lumbar sprain is an injury to the ligaments that connect the lumbar vertebrae, coded S33.5XXA, while a lumbar strain is an injury to the muscles, fascia, or tendons of the lower back, coded S39.012A. Because the S33 category carries an Excludes2 note for lower back strains, both codes can be reported together when both injuries are documented.
ICD-9 used a single code, 847.2, for both sprain and strain of the lumbar region, and many chiropractic templates still reflect that habit with the phrase “lumbar sprain/strain.” ICD-10-CM split the two, so a slash diagnosis forces the biller to guess which tissue was injured. One question we hear constantly from practice managers is which code to pick when the note reads “lumbosacral sprain/strain.” The right answer is not a guess: query the treating chiropractor and let the exam findings decide.
Notes that describe pain at end range of motion and with joint stress testing point toward ligament involvement, while notes centered on muscle tenderness, spasm, and pain with resisted contraction point toward a strain. When the documentation supports both injuries, report both codes and list first the one chiefly responsible for the visit.
Do not add M54.50, low back pain, unspecified, once a sprain or strain is documented. The ICD-10-CM Official Guidelines state that signs and symptoms routinely associated with a confirmed diagnosis are not coded separately, and some payers read a stacked symptom code as a sign that the injury diagnosis is unsupported.
Which 7th character should chiropractors use for a lumbar sprain?
Chiropractors should use the 7th character A for every visit where the patient is receiving active treatment for the lumbar sprain, not only the first visit. Switch to D only after active treatment ends and care becomes routine healing-phase follow-up, and use S only for late effects of a sprain that has already resolved.
The ICD-10-CM Official Guidelines, Section I.C.19.a, tie the 7th character to the phase of care, not to the visit count or to whether the patient is new to the office. Character A applies while the patient receives active treatment, character D applies to routine care during the healing or recovery phase after active treatment ends, and character S applies to a complication or condition that results from the original injury.
The most common issue we see providers run into is an EHR that flips S33.5XXA to S33.5XXD automatically on the second visit. That default contradicts the treatment record. A patient on a 12-visit corrective plan with documented functional goals is still in active treatment at visit nine, and the claim should say so.
Medicare makes the logic explicit. Medicare covers chiropractic manipulation only during active or corrective treatment, reported with the AT modifier, and Medicare Administrative Contractor code lists for secondary sprain diagnoses carry the A character for that reason. A claim with AT and S33.5XXD tells the payer two different stories about the same visit. Commercial payers and auto carriers vary, so confirm each payer policy, but the default for an active corrective plan is A.
Medicare Rules for Lumbar Sprain Claims in 2026
Providers often come to us after a run of Medicare denials that trace back to one sequencing error: S33.5XXA listed first and the subluxation code listed second, or left off entirely. Under the CMS Medicare Benefit Policy Manual, Chapter 15, Section 240, Medicare Part B covers only manual manipulation of the spine to correct a subluxation, billed with CPT 98940 for one or two regions, 98941 for three or four, and 98942 for five.
That coverage rule sets the claim order. The primary diagnosis is the subluxation code for the treated region, which is M99.03, segmental and somatic dysfunction of the lumbar region, for a lumbar adjustment. S33.5XXA follows as the secondary diagnosis that explains why the subluxation needs care. If the pelvis is also adjusted, M99.05 adds a second region and the visit still fits 98940.
Documentation must show the subluxation through an x-ray or a PART exam, meaning two of four findings (pain or tenderness, asymmetry or misalignment, range of motion abnormality, and tissue or tone changes), with one of the two being asymmetry or range of motion. Every active-care claim carries the AT modifier. Once the patient reaches maximum improvement, care becomes maintenance, which Medicare does not cover, and the claim needs a signed ABN with the GA modifier.
Payment is tightening at the same time. The CY 2026 Physician Fee Schedule conversion factor for non-APM providers is $33.40, and the CY 2027 final rule set a lower $32.63, so every denied lumbar claim costs more to replace. See what that means per code in our review of 2027 chiropractic Medicare payment changes.
Medicare lumbar claims fail on sequencing, 7th characters, and missing AT modifiers more often than on the diagnosis itself. Billing companies in our network work chiropractic claim edits every day, with rates starting as low as 2.95%.
How do you code a lumbar sprain claim correctly?
Code a lumbar sprain claim by confirming the injury mechanism, identifying the injured tissue and site, assigning the 7th character by phase of care, and sequencing the codes for the payer. Medicare claims list the subluxation code first, while auto, workers’ compensation, and most commercial claims can lead with the sprain code.
- Confirm the injury mechanism. Document what happened and when, because a sprain code without a traumatic event invites an audit.
- Identify the injured tissue. Use S33.5- for a ligament injury, S39.012- for a muscle or tendon injury, and both when the exam supports both.
- Pin down the site. Choose S33.5 for the lumbar spine, S33.6 for the sacroiliac joint, S33.9 for lumbosacral, and S33.8 for other specified sites.
- Assign the 7th character. Keep A through active treatment, move to D for healing-phase follow-up, and reserve S for late effects.
- Sequence for the payer. Put M99.03 first on Medicare manipulation claims and the sprain code first on most injury claims.
- Add external cause codes when required. Report the mechanism, activity, and status codes that auto and workers’ compensation payers expect.
- Match the care plan. Tie every date of service to a written plan with goals, visit frequency, and re-exam dates.
The order matters because each step answers a question a claims reviewer will ask. Skipping step one is the costliest miss, since no 7th character or sequencing fix can rescue a sprain claim with no documented injury. Steps four and seven work as a pair, because the care plan justifies keeping the A character across visits.
Personal Injury and Workers’ Comp Lumbar Sprain Claims
Auto and workers’ compensation claims are where lumbar sprain coding carries the most dollars and the most scrutiny. The ICD-10-CM Official Guidelines do not require external cause codes nationally unless a state mandate or payer policy applies, but adjusters use them to confirm causation. A rear-end collision supports V43.52XA, car driver injured in collision with other type car in traffic accident. A lifting injury at work supports X50.0XXA, overexertion from strenuous movement or load, with Y99.0 showing the activity was done for pay.
The CMS-1500 has to match. Box 10a flags an employment-related condition, Box 10b flags an auto accident and the state where it happened, and Box 14 carries the date of injury. A missing accident indicator is one of the fastest ways to get an auto claim bounced back to the office.
Consider a hypothetical personal injury case. A driver rear-ended at a stoplight completes 16 visits over eight weeks at $95 in charges per visit, or $1,520 total. The original claims list M54.50 first and switch to S33.5XXD from the second visit onward. The adjuster reads the D character as healing-phase care and disputes visits two through sixteen, putting $1,425 of the $1,520 in question. Rebuilt with S33.5XXA through the active plan, V43.52XA, Box 10b completed, and a documented re-exam at visit eight, the same care tells one consistent story. The care did not change; the coding did, and so did the outcome of the review.
Frequently Asked Questions
Is S33.5XXA a billable ICD-10 code?
Yes. S33.5XXA is a billable ICD-10-CM code for sprain of ligaments of the lumbar spine, initial encounter, and it is valid for dates of service on or after October 1, 2026 under the FY2027 code set. The parent codes S33 and S33.5 are not billable and reject if submitted without all seven characters.
What is the ICD-10 code for lumbosacral sprain?
The ICD-10-CM Index directs lumbosacral sprain to S33.9, sprain of unspecified parts of lumbar spine and pelvis, so an active-care claim uses S33.9XXA. When the documentation specifies the lumbar ligaments, S33.5XXA is more precise, and a sacroiliac joint sprain belongs under S33.6XXA.
Can lumbar sprain and lumbar strain be coded together?
Yes. Category S33 carries an Excludes2 note for lower back strains, which allows S33.5XXA and S39.012A on the same claim when the record documents both a ligament injury and a muscle or tendon injury. List first the injury chiefly responsible for the visit, and avoid coding both from a single slash diagnosis.
Is M54.5 still a valid code for low back pain?
No. M54.5 was deleted on October 1, 2021, and replaced by M54.50 for low back pain, unspecified, M54.51 for vertebrogenic low back pain, and M54.59 for other low back pain. None of these should be added on top of a confirmed lumbar sprain diagnosis.
Which ICD-10 code is used for a chronic lumbar sprain?
ICD-10-CM has no chronic version of S33.5. When a resolved sprain leaves a lasting problem, code that current condition first and add S33.5XXS to show it is a sequela of the injury. Ongoing pain without a new injury is coded from the M chapter based on documentation, not with S33.5XXA.
Do Medicare Advantage plans follow the same lumbar sprain rules?
Most Medicare Advantage plans start from traditional Medicare coverage for chiropractic manipulation, including a subluxation code listed first, but many add their own prior authorization, visit limits, or network rules. Check each plan’s policy before the first visit, since a plan-specific edit can deny a correctly coded claim.
Next Steps
Lumbar sprain coding sits inside a larger set of chiropractic diagnosis and payment rules. Use these resources to check the rest of your claim workflow before your next payer audit or EHR template review:
- Review every diagnosis your practice bills in the Chiropractic ICD-10 Codes: 2026 Cheat Sheet and confirm your pick lists match the current code set.
- Audit favorites and superbills against the chiropractic ICD-10 changes effective October 1, 2026 before a deleted code reaches a claim.
- Plan next year’s revenue with our breakdown of 2027 chiropractic Medicare payment changes for 98940, 98941, and 98942.
Then run a short audit. Pull ten recent lumbar claims, check each 7th character against the care plan dates, confirm M99.03 is listed first on every Medicare manipulation claim, and confirm the accident indicator on every auto claim. If more than one or two fail, the issue is a process gap rather than a one-off error, and it is worth handing to a team that works chiropractic claims every day. Practices with a heavy personal injury caseload should run the same check on external cause codes, Box 10b, and Box 14 injury dates, since those fields drive most adjuster disputes on lumbar sprain care.
Get matched with chiropractic billing companies that keep lumbar sprain claims clean. Matching is 100% free and rates start as low as 2.95%.


